Nowadays, most people are not satisfied with their architectural lighting. If you are one those who want to initiate a change in their lighting, you are in the right place.
In which ways, we can improve the lighting in our homes?
The lighting is the main element, which directly, affects our vision towards the environment. Good lighting cannot catch our eyes as much as bad lighting does. The improper lighting can affect people’s behavior, such as depressive disorders.
Lighting design not only serve as a safety factor in dark environments but also play as a decorative factor in different areas too.
</>Therefore, we need to improve it as much as possible to induce the comfortability sense besides the necessary brightness. Taking the right procedures to improve lighting is an essential part of designing.
Here, you can find the nine lighting design tips to enhance your home living pleasure.
1. Use some source images as your first pace
Do not be afraid to use some reference images from different sources to start your imagination. Try to analyze the lightings in details for good lighting design.
You need to find, which parts of a house should be brighter and which parts are darker in those images.
The reference images are always a good source to find your initial idea. They also can guide you about distant parts lighting, and it is on you to choose the suitable properties for your interior design.
The more research you do about reference images, the faster result you can achieve.
2. Manage the architectural lighting works by the walls
The walls in room design should act as a light adjuster. You do not need to submerge the whole room with sunlight or lamp.
The distant emission to light some parts of a room is the most preferred way in proper lighting design. Even, the corners can get different lighting than the middle parts.
If you choose to have sunlight, then the light will be bright and blue-colored. However, if you want to lit the room by the lamps, a darker environment with warmer shades are the results.
3. Utilize various architectural lighting for the distant area
A common mistake in architectural area lighting is to make an area very bright. Thus, this results in dilating the pupils and glare, which makes the neighborhood spaces darker.
We have to make comfortable places, thus in some specific points to put lighting sources for the elimination of dark corners. In this case, we can provide a good architectural area lighting for distant spaces and walls.
4. The important objects need concentrated architectural lighting works
Submerging a room in very bright manner is another common mistake. You need to contrast while having the suitable architectural area lighting.
Just like as a theater, which you can only observe the seat numbers and entrances, in your living room, the arts on the wall and books on shelves are attractive objects which need more concentration.
In the kitchen, you need the architectural area lighting on the counter instead of walkways. In other words, focus the light on the needs.
5. Choose the LED light for architectural lighting works
For homes, you cannot employ the high-exposure lighting, which usually we use in the office or another public area. Those bright lights, submerge the room in high lights’ beam.
As a good recommendation, you may use the LED light, which is low-wattage based and warm beams. Thus, this lighting can transform the sense of calmness to your house.
6. Take specific lighting for the various area
Consider your needs in each area, before arranging any lamps or project lighting there. "It’s far essential that you don't forget the room and what the primary function of that room is," explain Rocket and St. George.
For example, often, the kitchen is a place in which the family comes together in different meals. Thus, this can be for cooking or eating. Thus, low lights or candlelight is not an appropriate preference.
7. Think about using the sunlight
The light that enters the home could be direct sunlight or ambient one. You can utilize daylight by adding more windows or increasing the windows size.
But, wait! Some of you may mention the impossibility of this tip. You can use skylight and solar tubes too. Skylights can provide high ranges of lighting which is about 30% of current windows lighting.
They are the best way for general living environments, which can add more lighting. But don’t forget, you should not make a high range of lighting, since it may make glare and lead to some dark neighborhood results,
8. Aim the light upward
Upward lights may be used to architectural lightings work capabilities and special regions significantly brighter than their surround.
The eye catches to factors of brightness, and accent lighting can assist to set up a visual hierarchy.
We use uplighting for highlighting focal points. It performed through mounting a fixture at the floor and aiming the mild upwards on walls or facade for specific dramatic outcomes.
9. Create contrast in façade of architectural lighting area
We can use lighting in the exterior of homes too. In exterior and façade, you can use some lightings to create a good contrast in nights.
If the façade of a building functions an everyday pattern of windows, one method may be to use linear LED luminaires inside the recesses.
The colors could be different based on the façade decoration, and in most cases, you can focus on important parts of your façade more by proper architectural lighting works.
Wall lighting is an architectural light approach used to reveal exciting textured surfaces. Lighting fixtures positioned near a wall, both from the floor or above, forcing the beam of mild to hit the wall at a narrow perspective.
The attitude creates shadows and attracts the eye to the texture of the wall.
Shadows deepened by way of transferring the perspective of the lighting toward or also from the wall.
Conclusion
As mentioned, architectural lighting has a great influence on the environment mood.
Also, people feelings can affect by lighting design. Thus you need to follow the nine mentioned tips to make a proper plan. Thus, the lighting design and architectural lighting area are the main part of your device.
We should utilize the natural light as the priority since it comes from nature and nature’s feeling is a necessary part of human life.
Do you think the artificial light can have the same feeling as the natural light have? What are other innovative ways to improve the lighting?
Please contribute your idea about architectural lighting in comments.
Comments